View HI80T15410D_8963687.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(hi80) ultra - precision high - power high - voltage resistors token electronics industry co., ltd. taiwan: no.137, sec. 1, zhongxing rd., wugu district, new taipei city, taiwan, r.o.c. 24872 t el : +886 2981 0109 f ax : +886 2988 7487 china: 12f, zhong xing industry bld., chuang ye road, nan shan district, shen zhen city, guang dong, china 518054 tel : +86 755 26055363; fax : +86 755 26055365 web: www.token.com.tw mailto:rfq@token.com.tw version: november 22, 2017
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 1 / 11 ? product introduction features : ? thick film sensorless design. ? wide range of resistance. ? bottom temperature coefficient and high precision. ? resistance to humidity, heat and electricity. ? long term p erformance, stable and reliable . applications : ? impulse voltage generators, ? arc furnace damping, energy research, ? pulse modulators, radar pulse - forming networks, ? cap acitor crowbar circuits, high voltage snubber circuits, ? x - ray/imaging equipment, and emi/lightning supression. token electronic ultra - precision high - power high - voltage resistor (hi80) family series take advantage of new ultra - fine ruthenium material, 95% aluminum oxide ceramic rods, and thick film non - inductive serpentine pattern design. precision can be narrowed to 0.1%, and power breakthrough 300w. (hi80) featuring heat - resistant, humidity - resistant, resisting electrical pulse, and stable and reliab le long - term performance, is specifically designed for general purpose industrial high voltage system applications. (hi80) family of high - voltage resistors includes conventional high - voltage resistors (hi80d), conventional miniaturized high - voltage resisto rs (hi80ds), high - power high - voltage resistors (hi80p), and ultra - precision high - voltage resistors (hi80t). conventional high voltage resistors (hi80d) have a wide resistance range of 200 ~ 10g, rated power 2.5w ~ 20w, accuracy tolerance f ( 1%), j ( 5 %), k ( 10%), the lowest temperature coefficient down to 50ppm on request, and the standard temperature coefficient of 100ppm. (hi80ds) all - film conventional miniature high - voltage resistor relative to (hi80d), with small size, higher power 3w ~ 30w, with stand higher voltage, and none - inductance. the temperature coefficient of the lowest can reach 50ppm (25 ~105 ), the standard temperature coefficient of 100ppm. precision tolerances f (1%), j (5%), k (10%). high power high voltage resistors (hi80p) hav e high rated power 20w ~ 300w, resistance range 1 ~ 1g, precision tolerance d ( 0.5%), f ( 1%), j ( 5%), k ( 10% ), the temperature coefficient of up to 25ppm (on request), the standard temperature coefficient of 50ppm. ultra - precision high - voltage r esistor (hi80t) characters 15ppm temperature coefficient, the standard temperature coefficient is 25ppm, the precision tolerance has b ( 0.1%), d ( 0.5%), f ( 1%), the resistance range 1 ~ 500m, and the rated power 0.8w ~ 6w to choose from. token (hi8 0) voltage resistor series is able to absorb large amounts of energy at high voltage while remaining non - inductive and heavy load characteristics. the hi80 conforms to the rohs directives and lead - free. customed design, and tighter tolerances are available on request. for customed designs, tighter tolerances, non - standard technical requirements, or custom special applications, please contact our sales for more information or link to token official website " high voltage resistors " to get more information. new ruthenium material, extended ultra - precision high - power high - voltage resistors (hi80) breakthrough 300w, precision narrowed to 0.1%.
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 2 / 11 ? hi80d spec. conventional high voltage resistor construction (hi80d) membrane material (a) ruthenium paste base material (b) 95% aluminum oxide, al 2 o 3 encapsulating material (c) high temperature silicone resin specifications & painted dimensions (unit: mm) (hi80d) part number rated power (w) ambient temperature (75 ) max. continuous oper. volt (kv) resistance range () dimensions (mm) min. max. l 0.5mm e 3mm d 0.5mm d 0.1mm hi80d - 15 0.5 3.0 200 1g 15 30 5.0 0.8 hi80d - 20 2.5 4.8 200 1g 20 28 8.0 1.0 hi80d - 26 3.7 6.4 250 1g 27 28 8.0 1.0 hi80d - 32 4.5 8.0 300 1.5g 33 28 8.0 1.0 hi80d - 39 5.2 12.8 400 1.5g 39 28 8.0 1.0 hi80d - 52 7.5 16 500 2.5g 52 28 8.0 1.0 hi80d - 78 11 24 900 4g 78 28 8.0 1.0 hi80d - 103 12 32 1k2 6g 103 28 8.0 1.0 hi80d - 124 15 40 1k5 8g 124 28 8.0 1.0 hi80d - 154 20 45 2k 10g 154 28 8.0 1.0 conventional high voltage resistor painted dimensions (unit: mm) - (hi80d)
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 3 / 11 ? hi80ds spec. conventional miniature high voltage resistor construction (hi80ds) membrane material (a) ruthenium paste base material (b) 95% aluminum oxide, al 2 o 3 encapsulating material (c) high temperature silicone resin conventional miniature specifications & painted dimensions (unit: mm) (hi80ds) part number rated power (w) ambient temperature (75 ) max. continuous oper. volt (kv) resistance range () dimensions (mm) min. max. l 0.5mm e 3mm d 0.5mm d 0.1mm hi80ds - 20 3 4.8 200 1g 20.2 30 8.2 1.0 hi80ds - 26 5 6.4 250 1g 26.9 30 8.2 1.0 hi80ds - 32 7 8.0 300 1.5g 33.0 30 8.2 1.0 hi80ds - 39 9 12.8 400 1.5g 39.5 30 8.2 1.0 hi80ds - 52 10 16 500 2.5g 52.1 30 8.2 1.0 hi80ds - 78 15 24 900 4g 77.7 30 8.2 1.0 hi80ds - 103 20 32 1k2 6g 102.9 30 8.2 1.0 hi80ds - 124 25 40 1k5 8g 123.7 30 8.2 1.0 hi80ds - 154 30 45 2k 10g 153.7 30 8.2 1.0 conventional miniature specifications & painted dimensions (unit: mm) - (hi80ds)
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 4 / 11 ? hi80t spec. conventional high voltage resistor construction (hi80d) membrane material (a) ruthenium paste base material (b) 95% aluminum oxide, al 2 o 3 encapsulating material (c) high temperature silicone resin ultra - precision high voltage resistor specifications (hi80t) part number rated power (w) max. continuous oper. volt (kv) resistance range () l 0.5mm e 3mm d 0.5mm d 0.1mm hi80t - 20 0.8 3 1 ~ 500m 20 30 8 1 hi80t - 26 1.0 4 1 ~ 500m 27 30 8 1 hi80t - 32 1.2 5 1 ~ 500m 33 30 8 1 hi80t - 39 1.5 6 1 ~ 500m 39 30 8 1 hi80t - 52 2 10 1 ~ 500m 52 30 8 1 hi80t - 78 3 15 1 ~ 500m 78 30 8 1 hi80t - 103 4 20 1 ~ 500m 103 30 8 1 hi80t - 124 5 25 1 ~ 500m 124 30 8 1 hi80t - 154 6 30 1 ~ 500m 154 30 8 1 ultra - precision high voltage resistor unpainted dimensions (unit: mm) - (hi80t)
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 5 / 11 ? hi80p specifications high - power high voltage resistor construction (unit: mm) (hi80p) membrane material (a) ruthenium paste base material (b) 95% aluminum oxide, al 2 o 3 encapsulating material (c) high temperature silicone resin cap (d) nickel plating copper high - power high voltage resistor specifications (unit: mm) (hi80p) part number rated power (w) max. continuous oper. volt (kv) resistance range () l 1mm e 1mm d 0.5mm d 0.01mm hi80p - 20 20 30 1 ~ 1g 116 10 17 m6 hi80p - 30 30 30 1 ~ 1g 116 10 19 m6 hi80p - 50 50 30 1 ~ 1g 116 10 21 m6 hi80p - 80 80 30 1 ~ 1g 130 10 28 m6 hi80p - 100 100 35 1 ~ 1g 160 10 28 m6 hi80p - 150 150 60 1 ~ 1g 210 10 28 m6 hi80p - 200 200 60 1 ~ 1g 260 10 28 m6 hi80p - 300 300 80 1 ~ 1g 310 10 33 m6 high - power high voltage resistor dimensions (unit: mm) - (hi80p)
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 6 / 11 ? environmental characteristics technical characteristics - (hi80) part number resistance range () tolerance (%) tcr @25 ( - 55 ~ +105 ) insulation withstand voltage insulation resistance operating temp. range hi80d 200 ~ 10g 1% ~ 10% 100ppm/ , (50ppm/ on request) 1000vdc 10g - 55 ~ +225 hi80ds 200 ~ 10g 5% ~ 10% 100ppm/ , (50ppm/ on request) hi80t 1 ~ 500m 0.1% ~ 1% 25ppm/ , (15ppm/ on request) hi80p 1 ~ 1g 0.5% ~ 10% 50ppm/ , (25ppm/ on request) environmental characteristics - (hi80) inspection item inspection method performance requirement overload 5 times the rated power, but not more than 1.5 times the maximum continuous operating voltage, 5 seconds r (0.2%r + 0.01) load life 1000 hours under rated power r (0.5%r + 0.01) steady - state damp heat 40 , rh 95%, 240h r (0.4%r + 0.01) temperature shock - 65 ~ 155 , 5 cycle r (0.2%r + 0.01)
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 7 / 11 ? power derating curve power derating curve - (hi80) power derating curve - (hi80ds)
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 8 / 11 ? serpentine pattern advance technique of non - inductive & serpentine pattern (hi80) non - inductive performance: ? h i80 non - inductive design which uses a serpentine resistive pattern that offers for zigzagging lines to carry current in opposite directions, thereby achieving maximum neutralization of flux fields over the entire length of the resistor. ? this efficient non - inductive construction without derating of any performance advantages is ideal for applications where high frequency is required. serpentine pattern screen printing design: ? type high voltage h i80 precision resistors combine token's non - inductive serpentin e pattern, high thru - put screen printed silicone coating. ? the alignment of the gap in the serpentine resistor pattern with the gap in the coating pattern provides a complete encapsulation of the resistor element. ? the cap and lead assemblies are pressed o nto the resistor core, finishing the resistor and providing rugged terminal attachment.
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 9 / 11 ? order codes order codes (hi80d) conventional high voltage resistor hi80d 39 1g f part number hi80d rated power (w) 20 2.5w 26 3.7w 39 5.2w 103 12w 154 20w resistance value () 1k1 1.1k 110k 110k 1m1 1.1m 110m 110m 1g5 1.5g 10g 10g resistance tolerance (%) f 1% j 5% k 10% note: tcr 100ppm/ order codes (hi80ds) conventional miniature high voltage resistors hi80ds 124 1g f part number hi80ds rated power (w) 20 3w 32 7w 78 15w 103 20w 154 30w resistance value () 1k1 1.1k 110k 110k 1m1 1.1m 110m 110m 1g5 1.5g 10g 10g resistance tolerance (%) j 5% k 10% note: tcr 100ppm/ order codes (hi80t) ultra - precision high voltage resistor hi80t 32 500m b part number hi80t rated power (w) 20 0.8w 32 1.2w 52 2w 154 6w resistance value () 10 10 1k1 1.1k 110k 110k 1m1 1.1m 500m 500m resistance tolerance (%) b 0.1% d 0.5% f 1% note: tcr 25ppm/
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 10 / 11 order codes (hi80p) high - power high voltage resistor hi80p 20 a 1g f part number hi80p rated power (w) 20 20w 30 30w 150 150w 300 300w type a b c resistance value () 10 10 1k1 1.1k 110k 110k 1m1 1.1m 110m 110m 10g 10g resistance tolerance (%) d 0.5% f 1% j 5% k 10% note: tcr 50ppm/
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 11 / 11 ? general information cost effective complete selection of high voltage components token high voltage series can be specified for use in industrial and general purpose high voltage systems, as well as a complete selection of high resistance, hi - meg, high - voltage, high frequency, and bulk ceramic resistors for higher a verage power dissipation. these high resistance, high frequency, high resistance resistors combine the proven performance of token resistance system with new cost efficient design elements and high voltage applications. detailed specifications, both mecha nical and electrical, please contact our sales representative for more information. high voltage applications resistors produced from serpentine pattern screen printing design or bulk ceramic materials have displayed several key advantages in demanding hi gh - voltage situations, including both continuous - wave and pulse applications. these include radar and broadcast transmitters, x - ray systems, defibrillators, lasers, and high - voltage semiconductor process equipment applications, where resistors must handle peak voltage anywhere from 8kv to 75kv. typical applications include current limit in capacitor charge/discharge, crowbar, and tube - arc circuits. in these uses, bulk ceramic resistors provide low inductance, high average power per unit size, stability at h igh voltage, and durability at extreme peak - power levels. film resistors typically cannot withstand high - voltage pulse applications. rf/digital loads and high - frequency applications token non - inductive voltage resistors are used extensively for high - frequ ency rf loads in broadcast and communication equipment because of their non - inductive characteristics. they provide excellent non - inductive power - handling capacity at frequencies up to the gigahertz range, with no sacrifice in power dissipation. film resi stors may provide the needed non - inductive characteristics required by such rf applications, but they have size limitations and present reliability problems due to potential film burnout. this is especially true in advanced digital applications such as dig ital radio and tv transmitters involving pulses at high frequencies. application notes ? due to the high voltage which can appear between the end cap and any adjacent metal part, resistors should be mounted at an adequate distance from other conductors. ? an appropriate number of resistors may be screwed together as a stick to provide an assembly which will be capable to withstanding any desired voltage, providing no individual resistor is subject to a greater stress or power dissipation than is recommended in its data sheet, and that appropriate anticorona devices are fitted. ? the axial termination should not be bent closer than twice the diameter of the terminal wire from the body of the resistor. when resistors are required to be potted, the preferred encap sulant is a silicone compound. oil immersion for some high voltage applications it is required to immerse the components in oil or gas to reduce the effects of corona and surface tracking. a special lacquer protected version of the resistor is available, suitable for immersion in transformer oil or sf6.

▲Up To Search▲

Price & Availability of HI80T15410D

	To Download HI80T15410D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .